BCLCY - CREAM HARDENER, DX-672
- MSDS: BCLCY
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: CREAM HARDENER, DX-672
- National Stock Number: 8030-00N003903
Product Identification
Product ID:CREAM HARDENER, DX-672
MSDS Date:08/04/1988
FSC:8030
NIIN:00N003903
MSDS Number: BCLCY
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 800-543-4530
Info Phone: 513-489-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
BENZOYL PEROXIDE
CAS: 94-36-0
RTECS: DM8575000
Fraction By Weight: 50%
ACGIH TLV: 5 MG/CUM
PLASTICIZERS
Fraction By Weight: 50%
Hazards
Effects of Overexposure:EYE/SKIN:IRRITATION.
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. SKIN:WASH
WITH SOAP AND WATER. INGESTION: ADMINISTOR AN EMETIC.
Fire Fighting
Flash Point Method:TCC
Flash Point:180F,82C
Extinguishing Media:CO*2, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . EVACUATE AREA & FIGHT FIRE FROM A DISTANCE.
COOL SURROUNDING AREA W/WATER.
Unusual Fire/Explosion Hazard:WHEN CONFINED DURING EXPOSURE TO A FIRE
AN EXPLOSIVE DECOMPOSITION MAY OCCUR.
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT. NOTE:REVIEW MSDS FOR
SOLVENT PRIOR TO USE.
Handling
Handling and Storage Precautions:STORE BELOW 100F/37C IN ORIGINAL
CONTAINER
Exposure Controls
Ventilation:MECHANICAL
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:SEE ING 4
Melt/Freeze Pt:M.P/F.P Text:DECOMPOSES
Vapor Density:>1
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:RED, WHITE OR BLUE; MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:NO
STRONG ACIDS, ALKALIS, REDUCING AGENTS, OXIDIZERS, METAL SALTS.
Stability Condition to Avoid:EXPOSURE TO TEMPERATURE ABOVE 105F.
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.